Wireless mud density sensor for mud logging unit The density sensor uses the differential pressure principle to measure the density of the drilling fluid.
PRODUCT INTRODUCTION
The density sensor uses the differential pressure principle to measure the density of the drilling fluid.When the sensor is placed vertically in the drilling fluid, the pressure on the surface of the two pressure sensors is different because the depth of the two pressure sensors is different in the drilling fluid, and the distance between the two pressure sensors is a constant, so their difference The pressure is linear with the density of the liquid.
PRODUCT SPECIFICATION
Measuring range: 0~3g/cm3
Accuracy: ±1%
FS Supply voltage: 3.5-5VDC
Output signal: 0.5-2.5V
Full level: IEC EEX iaII CT6
Working temperature: -20~70°C
Protection level: IP67
PRODUCT FEATURE AND APPLICATION
The differential pressure type density sensor can be widely used in industrial fields such as on-site pipelines, open or closed storage tanks, and can continuously and in real-time measure the liquid density of pipelines or tanks.
PRODUCT DETAILS
The sensor antenna and the circuit board are connected by a SAM interface, and the antenna center frequency is 433 MHz, and the antenna and the circuit board are connected by a SAM interface extension cable.
PRODUCT QUALIFICATION
All sensors either are EX type or are intrinsically safe. Zone barriers are installed in the Unit. Using well-known brand products at home and abroad, the sensors of mud logging unit have the advantage of technical and performance indicators. At the same time, the service life is long.
CNPS can ship the goods to you by Express, Air, or sea .
Battery and charger used for the transmission box of wireless sensors Battery and charger is used for the transmission box of all the wireless sensors .
View specifications →The wireless transmission box for mud logging unit The wireless transmission box is used for the acquisition and transmission of current signal .
View specifications →Wireless casing pressure sensor for mud logging unit Pressure sensor is a kind of device that converts non electric quantity into electric signal.
View specifications →
